3 Get started
Charge power
RAGA has a built-in battery that can be
charged through the USB socket of a computer.
Connect RAGA to a PC by using the USB
cable.
Note
When you connect RAGA to a computer, you are
[Charge & play].
RAGA automatically applies [Charge & transfer], if no
new selection is made.
Battery level indication
When the battery is low, the low
battery screen is displayed repeatedly.
When the charging process is
complete,
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
EN
10
[Charge & transfer] or
is displayed.
To conserve battery power and increase the
play time, do the following on RAGA:
Set the backlight timer to a low value
> [Display settings] >
(go to
[Backlight timer]).
Charge through a USB AC/DC
adapter
To charge RAGA through a USB AC/DC
adapter, use Philips AY5800 (Input: 100 - 240 V,
~50/60 Hz, 0.15 A; Output: 5.0 V, 0.5A).
Switch the player on or off
Press and hold
until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.