Get Started; Charge Power; Switch The Player On Or Off; Automatic Standby And Shut Down - Philips GoGEAR SA4VBE04 User Manual

3 Get started

Charge power

VIBE has a built in battery that can be charged
through the USB socket of a computer.
Connect VIBE to a PC by using the USB cable.
Note
‡
When you connect VIBE WR D FRPSXWHU \RX DUH EULHÁ\
prompted to select: [Charge & transfer] or [Charge
& play].
‡
VIBE automatically applies [Charge & transfer], if no
new selection is made.
Battery level indication
‡ When the battery is low, the low
battery screen is displayed repeatedly.
‡ When the charging process is
complete,
Note
‡
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
is displayed.
To conserve battery power and increase the
play time, do the following on VIBE:
‡ Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).

Switch the player on or off

Press and hold until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.
EN 13