Yamaha DTX900 Owner's Manual page 83

The second page when the INPUT display is called up:
9
The second page when the SOURCE display is
called up:
9
I Attack
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
attack time (from the moment a pad is hit until the moment
the maximum initial level of the volume is reached) of each
selected Trigger Input Jack. When the SOURCE display is
called up, this parameter determines the attack time of each
selected Trigger Input Source.
Range -64 – +63
J Decay
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
decay time (indicating how fast the volume falls from maxi-
mum attack level) of each selected Trigger Input Jack. When
the SOURCE display is called up, this parameter determines
the decay time of each selected Trigger Input Source.
Range -64 – +63
K Release
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
release time of each selected Trigger Input Jack. When the
SOURCE display is called up, this parameter determines the
release time of each selected Trigger Input Source.
Range -64 – +63
NOTE
• This parameter is available only when the RcvKeyOff parameter is set
to "on."
J K L M
J K L M
Drum Kit Mode [DRUM KIT]
L Filter
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
cutoff frequency of the low pass filter for each selected Trig-
ger Input Jack. When the SOURCE display is called up, this
parameter determines the cutoff frequency of the low pass fil-
ter for each selected Trigger Input Source.
Range -64 – +63
Low Pass Filter
Volume
Cutoff frequency
These frequencies are
"passed" by the filter.
M Q (Resonance)
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
resonance of the low pass filter for each selected Trigger Input
Jack. When the SOURCE display is called up, this parameter
determines the resonance of the low pass filter for each
selected Trigger Input Source. You can use this parameter to
add further character to the sound or change the sound in
more dramatic ways.
Range -64 – +63
Level
Cutoff frequency
Reference
High sounds
are muted.
Frequency (pitch)
Resonance
Frequency
83
DTX900 Owner's Manual