Yamaha DTX900 Owner's Manual page 73

Paramater
name
DelayC Determines the delay time for the center channel.
DelayL Determines the delay time for the L channel.
Determines the amount of time between the moment
DelayL>R the sound is input from the L channel and the
moment the sound is output to the R channel.
Determines the delay time for the R channel as off-
DelayOfstR
set.
DelayR Determines the delay time for the R channel.
Determines the amount of time between the moment
DelayR>L the sound is input from the R channel and the
moment the sound is output to the L channel.
[For REVERB effects, except EARLY REFLECTION]
Determines the density of the reverberations.
Density
[For EARLY REFLECTION]
Determines the density of the reflections.
[For FLANGER]
Determines the amplitude of the LFO wave which
controls the cyclic change of the delay modulation.
[For PHASER MONO, PHASER STEREO]
Depth
Determines the amplitude of the LFO wave which
controls the cyclic change of the phase modulation.
[For SPACE SIMULATOR]
Determines the depth of the simulated room.
Detune Determines the amount of detuning of the pitch.
Selects the device for changing how the sound is to
Device
be distorted.
[For TEMPO PHASER, EARLY REFLECTION]
Determines the spread of the selected effect.
Diffuse
[For REVERB effects, except EARLY REFLECTION]
Determines the spread of the reverb.
Determines the direction of the modulation controlled
Directn
by the envelope follower.
Determines the minimum level of the portions
Div.Lvl
extracted via the slice effect.
Determines the high frequency for dividing the entire
DivFreqH
sound into three bands.
Determines the low frequency for dividing the entire
DivFreqL
sound into three bands.
Determines how the sound (wave) is sliced by the
DivideType note length. This helps in setting rhythmic effects that
match the timing of the music.
DlyLvl Determines the level of the delayed sound.
Determines the level of the delayed sound for the
DlyLvlC
center channel.
DlyMix Determines the mixing level of the delayed sound.
DlyOfst Determines the offset value of the delay modulation.
Determines the speed (rate) at which the delay time
DlyTrnsit is changed from the current value to the specified
new value.
[For HARMONIC ENHANCER, TALKING MODULA-
TOR]
Determines the extent to which the enhancer or talk-
Drive ing modulator is applied.
[For NOISY, SLICE]
Determines the degree and character of the distor-
tion effect.
Determines the depth of the modulation generated
DriveHorn
via the rotation of the horn.
Determines the depth of the modulation generated
DriveRotor
via the rotation of the rotor.
Determines the balance of the dry sound and effect
Dry/Wet
sound.
Determines the cutoff frequency of the low pass filter
DryLPF
applied to the dry sound.
Determines the level of the dry sound (the unproc-
DryLvl
essed sound).
Determines the level of the dry sound (the unproc-
DryMixLvl
essed sound).
Determines the level of the dry signal sent to the
DrySndNoise
noise effect.
Descriptions
Basic Structure of the DTX900
Paramater
name
Determines the offset value added to the output from
DyLvlOfs
the envelope follower.
Determines the minimum level at which the envelope.
DyThreshLvl
follower starts.
Sets the curve that determines how the sound is dis-
Edge
torted.
Determines the change of the characteristics in high
Emphasi
frequencies.
Determines the Cutoff frequency of EQ1 (Low Shelv-
EQ1Freq
ing).
EQ1Gain Determines the level gain of EQ 1 (Low Shelving).
EQ2Freq Determines the center frequency of EQ2.
EQ2Gain Determines the level gain of EQ2.
EQ2Q Determines the Q of EQ2.
EQ3Freq Determines the center frequency of EQ3.
EQ3Gain Determines the level gain of EQ3.
EQ3Q Determines the Q of EQ3.
EQ4Freq Determines the center frequency of EQ4.
EQ4Gain Determines the level gain of EQ4.
EQ4Q Determines the Q of EQ4.
Determines the Cutoff frequency of EQ5 (High
EQ5Freq
Shelving).
EQ5Gain Determines the level gain of EQ5 (High Shelving).
Determines the center frequency for each band of
EQFreq
the EQ.
Determines the level gain of the EQ center frequency
EQGain
for each band.
EQWidth Determines the width of the EQ band.
Determines the level balance of the early reflection
ER/Rev
and reverb sound.
This Auto Pan parameter (available when PAN Direc-
F/RDpth tion is set to "L turn" and "R turn") determines the
depth of the F/R (front/rear) pan.
Determines how the high frequencies of the feedback
FBHiDmp
sound decay.
Determines the amount of decay in high frequencies
FBHiDmR
for the R channel as offset.
[For CHORUS effects, DELAY effects, TECH effects,
CLASSIC FLANGER, TEMPO FLANGER, DYNAMIC
FLANGER, COMP DISTORTION DELAY]
Determines the feedback level output from the delay
and returned to the input.
FBLevel
[For TEMPO PHASER, DYNAMIC PHASER]
Determines the feedback level output from the delay
and returned to the input.
[For REVERB effects]
Determines the feedback level of the initial delay.
Determines the feedback level of the delayed sound
FBLvl1
in the 1st series.
Determines the feedback level of the delayed sound
FBLvl2
in the 2nd series.
Determines the feedback level for the R channel as
FBLvlR
offset.
FBTime Determines the delay time of the feedback.
FBTime1 Determines the delay time of feedback 1.
FBTime2 Determines the delay time of feedback 2.
Determines the delay time of the feedback for the left
FBTimeL
channel.
Determines the delay time of the feedback for the
FBTimeR
right channel.
Determines the level of the sound signal output from
Feedback
the effect block and returned to its own input.
Fine1 Determines the fine pitch setting for the 1st series.
Fine2 Determines the fine pitch setting for the 2nd series.
[For LO-FI]
Determines the type of tonal characteristics.
FltType
[For DYNAMIC FILTER]
Determines the filter type.
Reference
Descriptions
73
DTX900 Owner's Manual