Cable Tv Setup - LG 32LX4DCS Owner's Manual

- After subscribing to a cable TV service from a local provider and installing a converter, you can watch
cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV
converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
When connecting with an antenna
S-VIDEO
COMPONENT1
R L
AUDIO INPUT
(R) AUDIO (L) VIDEO
Cable Box
TV
VCR
When connecting with a RCA cable
TV Back
DVI INPUT
(PC/DTV INPUT)
S-VIDEO
AUDIO
R L/MONO
VIDEO1
COMPONENT1
R L
AUDIO INPUT VIDEO INPUT
1
(R) AUDIO (L) VIDEO
Cable Box
TV
VCR

Cable TV Setup

TV Back
DVI INPUT
(PC/DTV INPUT)
AUDIO VIDEO
R L/MONO
VIDEO1
Antenna
VIDEO INPUT
1/2
OUTPUT
SWITCH
3 4
RF Cable
VIDEO
Antenna
OUTPUT
SWITCH
3 4
RF Cable
Connect the RF antenna socket of the cable box
1
to the Antenna socket on the set.
Connect the antenna cable to the RF antenna
2
socket of the cable box.
Select 3 or 4 with channel switch on the cable box.
3
Tune the TV channel to the same selected output
4
channel on the cable box.
5 Select channels at the cable box or with the cable
box remote control.
Connect the AUDIO/VIDEO jacks between TV
1
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
Select Video1 input source with using the
2
TV/VIDEO button on the remote control.
- If connected to VIDEO 2 input (TV side), select
Video2 input source.
Select your desired channel with the remote con-
3
trol for the cable box.
Installation
17