Troubleshooting; Self-Test Feature Check; Maintenance And Cleaning - Samsung SyncMaster T240M User Manual

Troubleshooting

Self-Test Feature Check

Note
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system;
Not Optimum Mode
If there is something wrong with the input signal, a message appears on the screen or the
screen goes blank although the power indicator LED is still on. The message may indicate
that the monitor is out of scan range or that you need to check the signal cable.
Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are
supported by the monitor.

Maintenance and Cleaning

1. Maintaining the Monitor Case.
Clean with a soft cloth after disconnecting the power cord.
2. Maintaining the Flat Panel Display Screen.
your monitor is functioning properly.
• Do not use benzene, thinner or other flammable sub-
stances, or a wet cloth.
• We recommend a Samsung cleansing agent is used
to prevent damage to the screen.