Samsung SyncMaster T240M User Manual page 44

Note
Warm1 or Warm2 is only activated when the picture mode is Movie.
Settings can be adjusted and stored for each external device you have connected to an input
of the TV.
MENU →
Size
You can switch the Size.
The direct button on the remote control is 'P.SIZE' button.
• Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.
• 16:9 - Sets the picture to 16:9 wide mode.
• Wide Zoom - Magnify the size of the picture more than 4:3. (Move the screen up/donw
using the
• Zoom - Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
(Select
down. After selecting
the vertical direction.)
• 4:3 - Sets the picture to 4:3 normal mode.
• Just Scan - Use the function to see the original image where its part being cut-off mini-
mized with HDMI (720p/ 1080i / 1080p), Component (1080i / 1080p) input signals.
Note
Settings can be adjusted and stored for each external device you have connected to an input
of the TV.
Input Source
TV, AV , S-Video
Component(576i,576p,720p)
(576i,576p)
Adjusting the LCD Display
, ,
→ → → →
or button after selecting the
by pressing the or button. Use the or button to move the picture up and
, use the
,HDMI
→ MENU,EXIT
by pressing the
or button to magnify or reduce the picture size in
Picture Size
Wide,16:9, Wide Zoom, Zoom, 4:3
16:9, Wide Zoom, Zoom, 4:3
or ENTER button.)