Setting the Date & Time
1
Turn the power on, and set the
camera to the Setup Menu.
2
Select [
Press
Time] then press
button to launch the submenu.
3
Set date and time.
Press
button to move the cursor between settings.
4
Apply the setting.
After adjusting the settings, press the OK or the MENU button to apply the
setting.
C
a
u
t
i
o
n
C
a
u
t
i
o
n
Once the date, time and language have been set, changing the batteries or removing
the SD card will NOT reset these settings.
If the batteries are removed for longer than 48 hours, the Date and Time will need to
be re-set.
Date & Time].
or
to select [Date &
or the OK
or
to change the value of the cursor located. Press
3
or