Basic Operation; Turning The Power On And Off; P Ower S Aving F Unction - HP SB360 - 12 MP, 3IN LCD User Manual

Basic Operation

Turning the Power On and Off

1
Press the POWER button ( ) to turn on
the camera in the REC mode.
The power turns on, the lens extends
and the LED lights in green.
Press the PLAYBACK button ( ) to turn
on the camera in the PLAYBACK mode.
The power turns on, and an image
displays on the LCD monitor ( ).
2
Press the POWER button ( ) again to turn the power off.
The power turns off, the lens retracts and the LED turns off.
T i p s
T i p s
You can turn on the camera without the start-up and operating sound by
pressing and holding the POWER ( ) or the PLAYBACK ( ) button over 1.5
seconds.
Switch between REC mode and PLAYBACK mode (
Power Saving Function
For saving the battery power, the LCD monitor automatically turns off 1 minute after the
last control accessed (factory-preset setting). Press any button other than the power
button to turn on the LCD monitor. You can change the power save setting in Setup
menu ( page 19).
After the power saving function has been active for 1 minute, the power will turn off
completely. Press the POWER ( ) or the PLAYBACK ( ) button to restore the power.
The power save feature will not activate in the following situation:
Recording movie clips or audio files
Playing movie clips or audio files
Playing the slideshow
Connecting the camera to a computer or printer with the USB cable
12
page 13).