Manual Pc Adjustment - Eiki MODEL LC-SB10 Owner's Manual

Eiki international owner's manual projector model lc-sb10

Table of Contents

COMPUTER INPUT

This projector can automatically tune to the display signals from most personal computers currently distributed. However,

some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi-

Scan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be

recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special

signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This

enables you to recall the setting for a specific computer whenever you use it.

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button to move the red

frame pointer to the PC ADJUST Menu icon.

Press the POINT DOWN button to move the red frame pointer to

the item that you want to adjust and then press the SELECT

button. An adjustment dialog box will appear. Press the POINT

LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press the POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the POINT LEFT/RIGHT

button(s) to adjust the position.

Vertical

Adjusts vertical picture position. Press the POINT LEFT/RIGHT

button(s) to adjust the position.

Current mode

Press the SELECT button to show the information of computer

selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this

adjustment.