Installing Projector In Proper Position; Moving Projector - Eiki MODEL LC-SB10 Owner's Manual

PREPARATION
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
20˚
20˚
NO UPWARD
NO DOWNWARD
NO SIDEWAYS
Use Carry Handle when moving a projector.
When moving the projector, replace the Lens Cover and retract the
Adjustable Feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it into
the case (carrying bag) supplied with the projector.
CAUTION
Carrying Bag (supplied) is intended for protection from dust and
scratches on the surface of a cabinet, and it is not designed to
protect an appliance from external forces. Do not transport the
projector through a courier or transport services with this bag. The
projector can be damaged. When handling the projector, do not
drop, bump, subject it to strong forces or put other things on the
cabinet.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
G Do not drop or bump the projector, otherwise damages or malfunctions may result.
G When carrying the projector, use a suitable carrying case.
G Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, consult your dealer for best
way.
10

INSTALLING PROJECTOR IN PROPER POSITION

Do not tilt the projector more than 20 degrees above and below.
Do not point the projector up to project an image.
Do not point the projector down to project an image.
Do not put the projector on either side to project an image.

MOVING PROJECTOR