Manual Pc Adjustment - Eiki LC-XNB5M Owner's Manual

Eiki international owner's manual multimedia projector lc-xnb5m

Table of Contents

COMPUTER INPUT

This projector can automatically tune the display signals from most personal computers currently distributed. However,

some computers employ the special signal formats which may not be turned by Multi-Scan system of this projector. In this

case, the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed

picture, and projected improperly.

The MANUAL PC ADJUSTMENT function allows you to manually adjust several parameters to match these special signal

formats. Also, you can store these adjusted parameters in the 5 independent memory areas, enabling you to call up

whenever you need.

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button to move the red

frame pointer to the PC ADJUST Menu icon.

Press the POINT DOWN button to move the red frame pointer to

the item that you want to adjust and then press the SELECT

button. An adjustment dialog box will appear. Press the POINT

LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press the POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the POINT LEFT/RIGHT

button(s) to adjust the position.

Vertical

Adjusts vertical picture position. Press the POINT LEFT/RIGHT

button(s) to adjust the position.

Current mode

Press the SELECT button to show the information of the computer

selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this

adjustment.