Positioning Projector; Adjustable Feet - Eiki LC-XNB4M Owner's Manual

Eiki international multimedia projector owner's manual

Hide thumbs Also See for LC-XNB4M:

Owner's manual (49 pages)

Table Of Contents

Table of Contents

G This projector is designed to project on a flat projection surface.

G The projector can be focused from 5.3'(1.6m) ~ 40.0'(12.2m).

G Refer to the figure below to adjust a screen size.

H1 : H2 = 9 : 1

5.3' (1.6m)

31"

Screen Size

(W x H) mm

630 x 472

Zoom (min)

5.3' (1.6m)

Zoom (max)

–––––

Picture tilt and projection angle can be adjusted by rotating

ADJUSTABLE FEET. Projection angle can be adjusted to 15.6

degrees.

Lift the front of a projector and pull FEET LOCK LATCHES

on the both sides of a projector.

Release FEET LOCK LATCHES to lock ADJUSTABLE FEET

and rotate ADJUSTABLE FEET to fine tune position and tilt.

To retract ADJUSTABLE FEET, lift the front of a projector

and pull and undo FEET LOCK LATCHES.

Keystone distortion of a projected image can be adjusted by

Menu Operation. (Refer to P20 and 35.)

CAUTION

Avoid positioning a projector with the angle of more than 20

degrees. Projection Lamp may malfunction.