2: Adjusting The Viewing Angle Of The Tv - Sony Bravia KDL-32CX520 Operating Instructions Manual

For KDL-60EX720
1
Align with the two dowels of the Table-
Top Stand, and gently place the TV,
checking the f mark is facing the front.
Neck
2
Attach the TV and Table-Top Stand with
the supplied screw and hexagon wrench.
* 3 N·m {30 kgf·cm}
~
• Set the torque setting to approximately 3 N·m {30
kgf·cm}.
8
GB
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws
KDL-60EX720, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
~
• Do not remove the Table-Top Stand for any reason
• When removing the Table-Top Stand from the TV,
• To prevent damaging the surface of the LCD
2: Adjusting the viewing
This TV can be adjusted within the angles as
illustrated.
*
Angle adjustment (Swivel)
(except KDL-60EX720/
Head
KDL-26/22EX42x)
~
• When adjusting the angle, hold the stand with one
B Except KDL-32EX420 (Australia and New
B KDL-32EX420 (Australia and New Zealand
fixed in step 3. For
other than to install corresponding accessories on
the TV.
lay the display face down on a stable work surface
that is larger than the TV.
display, make sure to place a soft cloth on the work
surface.
angle of the TV
hand to avoid having the stand slip or TV tip over.
Zealand model)
20°
20°
model)
15°
15°
20°
20°
15°
15°