Canon PIXMA MG6320 Setup Manual page 19

WPS
Cannot connect. Connections are being attempted from multiple access points simultaneously.

The screen appears when connections are being attempted from multiple access points simultaneously. Wait for a
while, then confi gure WPS settings again. Press the WPS button on only one access point.
Failed to connect.

The screen appears when an error occurs.
Check the access point settings, then confi gure WPS settings again.
For details on how to check the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
Timeout error.

The screen appears when WPS setup was not completed within a specifi ed time.
• Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back
on.