Image Mode Selection - Eiki LC-XG250 Owner's Manual

Image Mode Selection

Image Mode Selection
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Menu icon.
2
Use the Point
pointer to the desired image mode and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
(This icon is displayed with the computer signal.)
Cinema
Picture mode adjusted with fine tone.
(This icon is displayed with the video signal.)
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 48). This Image memory is provided
in each computer, component, and video input source.
44
7 8 buttons to move the red
ed buttons to move the red frame
Image Menu
Move the red frame pointer to
the desired image mode and
press the SELECT button.
This will change to Cinema
mode icon with the video
signal input.
The selected image mode is check marked.
Image Menu icon