Yamaha Electone STAGEA ELB-01 Playing Manual page 30

3
"Timpani 1" is set for the Pedal Voice 2 in the selected registration. Make it a
little more simple and sparse, by muting Pedal Voice 2.
3-1
Press the [VOICE SECTION] button at the top left on the panel to light up
lamp [2] in the Voice Section as shown below.
When the Voice Section lamp [2] lights up, you can select a Voice from Voice Section 2 for
each Keyboard, or visually confirm the Voices selected from Voice Section 2 for each
Keyboard.
What is Voice Section 2?
For the Pedalboard, you can play two Voices from a single pedal by selecting Pedal
Voice 1 from the Pedal Voice 1 section and Pedal Voice 2 from the Pedal Voice 2
section. To switch between the available Pedal Voice sections, press the [VOICE
SECTION] button. For details, see "Switching between Voice section 1 and Voice
section 2" on page 29 in the Owner's Manual.
3-2
Press the [VOICE DISPLAY] button in the DISPLAY SELECT section.
The current Voices selected from Voice section 2 for each keyboard are shown.
3-3
Press the [D] button corresponding to "Timpani 1" in the display to mute
the Timpani 1 Voice.
The indicator """ changes to "'." Now, the Timpani 1 sound will be off even if you play
the Pedalboard.
30 Playing the ELB-01 — Tutorial
¨"Strings3
Ò"Sm.Pad6 ∏"Timpani1
¨"Strings3
Ò"Sm.Pad6 ∏'Timpani1
Mute (Off)