Yamaha Electone STAGEA ELB-01 Playing Manual page 22

3
Play a C chord with your left hand on the Lower Keyboard and a C note with
your foot on the Pedalboard, referring as needed to "Chords" on page 19.
As soon as you play the C chord, a gorgeous introduction with full accompaniment will begin
playing. Let the introduction continue for twelve bars, then start playing the melody with your
right hand on the Upper Keyboard from the second beat in the thirteenth bar. You can visually
confirm the beginning of the introduction with the "-13.1" indication in the Bar/Beat display on
the panel. The display counts forward to "1.1," indicating the beginning of the main section. To
actually start the tune, play the melody right at "-1.2".
Make sure to play the melody one octave higher on the keyboard for notes having the "8va" mark.
4
After you've played the melody to its end, press the ENDING [2] button with your
right hand—at the point in the score marked "ENDING 2 (with right hand)."
The ending pattern matching with the selected rhythm automatically starts playing. Keep holding
down the keys with your left hand while the ending pattern is playing.
22 Playing the ELB-01 — Tutorial
( )