Watchguard SOHO User Manual page 8

4
5
From the Windows desktop:
1
2
3
4
5
6
7
8
Install the SOHO Remote Management Client
Install the SOHO Remote Management client (which is labeled as a
Mobile User VPN, or MUVPN client) software on each remote
management computer. The software installation packages are
available from the LiveSecurity Service Web site:
The installation process consists of two steps: installing the software
and setting up the client.
8
Double click the Services network component.
The Select Network Service window appears.
Select the File and Printer Sharing for Microsoft Networks Network
Service and then click the OK button.
Installing the Client for Microsoft Networks Network Client
Select Start => Settings => Network and Dial-up Connections, then
select the Dial-up connection you use to access the Internet.
The connection window appears.
Click on the Properties button.
Select the Networking tab and then click the Install button.
The Select Network Component Type window appears.
Double click the Client network component.
The Select Network Protocol window appears.
Select the Client for Microsoft Networks Network Client and then
click the OK button.
Click the Cancel button to close the Select Network Component Type
window.
Click the OK button to preserve the installed components.
Click the Cancel button to close the Dial-up connection window.
h t t p :/ /w w w.w a t c h g u a r d . c o m /s u p p o r t
WatchGuard® SOHO Remote Management User Guide