Watchguard SOHO User Manual page 4

1
2
3
4
5
6
7
If there is no modem installed, you can enable the Don't detect my modem; I
will select it from a list checkbox then add a Standard 28800 modem.
8
9
10 Reboot your computer.
From the Windows desktop:
1
2
3
4
4
Installing Remote Access Server on Windows NT
Select Start => Settings => Control Panel. Double-click the Network
icon.
Select the Services tab.
Click the Add button.
Select Remote Access Services from the list, then click the OK button.
Enter the path to the Windows NT install files or insert your system
installation CD, then click the OK button.
The Remote Access Setup dialog box appears.
Click the Yes button to add a RAS capable device and enable you to
add a modem.
Click the Add button and complete the Install New Modem wizard
Select the modem added in the last step in the Add RAS Device dialog
box, then click the OK button.
Click the Continue button, then click the Close button.
Installing Dial-up Networking on Windows 98/ME
Select Start => Settings => Control Panel. Double-click the Add/
Remove Programs icon.
The Add/Remove Properties window appears.
Click on the Windows Setup tab.
The Windows Setup dialog box appears and searches for installed components.
Enable the Communications checkbox and click the OK button.
The Copying Files dialog box appears and copies the necessary files.
The Dial-Up Networking Setup dialog appears and prompts you to
restart the computer. Click the OK button.
The computer reboots.
N
OTE
WatchGuard® SOHO Remote Management User Guide