TrekStor i.Beat jump 2GB Quick Start Manual page 10

• Automatic memory assignment / automatic station search
To start the automatic station search, switch in the menu to "A
the A button. The
strongest reception and saves them in 30 memory locations.
• Switching between manual station selection and memory mode
Briefly press the A button to switch between manual station selection "M
memory mode "S
EN
• Switching between saved stations
In "S
TATION MEMORY
• Manually change frequency / manual search
In "M
ANUAL SCAN
Hold down the G or H button for the
and lower frequencies for stations.
• Saving individual stations
Change to manual station selection "M
"S
AVE STATION
to save the station.
• Deleting saved stations
Select "D
ELETE STATION
and confirm the deletion by pressing the A button.
• Recording FM radio
Hold the 4 button for approximately 2 seconds to start recording the radio. Briefly press the
4 button to stop recording.
Note: All radio recordings are displayed in the music library under "FM
"FM" folder of the
Mode: Voice recording
Switch to "V
OICE
You can record your voice using the integrated microphone. Hold the 4 button for approximately
2 seconds to start recording. Briefly press the 4 button to stop recording.
Note: All voice recordings are displayed in the music library under "V
"VOICE" folder of the
i.Beat jump
".
TATION MEMORY
", you can switch between available presets by briefly pressing the G or H button.
" briefly press the G or H button to change the reception frequency by 0.1 MHz.
" from the menu. Select a preset using the G or H button, and press the A button
" from the menu. Then select an existing preset using the G or H button,
i.Beat jump
.
" mode.
i.Beat jump
.
now automatically searches for the radio stations with the
i.Beat jump to automatically scan the upper
". Choose the desired frequency, and select
ANUAL SCAN
– 10 –
" and confirm by pressing
UTO SCAN
ANUAL SCAN
" and are saved in the
RECORD
" and are saved in the
OICE RECORD
" and