Table of Contents
Advertisement
If the desired memory location already contains an
7.
entry, the phone displays a message asking if you want
to replace the current entry. To replace the entry, press
. To return to the previous screen and select
another location, press
label one time for each stored name (for example, you
can only have one number labeled Work for a name
entry). Stored phone numbers must be unique. You can
only store a particular phone number one time
anywhere in your phone book.
Shortcuts for storing phone numbers
You can store a phone number quickly by entering the
number, and then pressing
to designate the label, name and entry. You can quickly save
a number after an incoming or outgoing call. See below for
"Storing phone numbers at the end of a call."
My Sprint PCS Phone Number
To display the phone number of your Sprint PCS Phone:
From the main menu, press
1.
Press
2.
Press
3.
Storing phone numbers at the end of a call
To store a phone number after ending a call:
Remember, if the call was incoming, and Caller ID
information was not available, then the store option will
not be available.
Once you have pressed
1.
screen displays the call time (length of call), phone
number of the party (if available), and the "
option.
To store the phone number, press
2.
at this point is the same as "To store numbers and
names:".
. You can only use each
. Then follow the prompts
for
.
My Phone#
to return to Standby mode.
to end your call, the
Using your Internal Phone Book
for
.
Phone Book
OK: Save
. The procedure
"
75
Advertisement
Table of Contents
