Printronix T5000 Programmer's Reference Manual page 75

X'02C101' Maximum Number of Simplex Keywords in an LCC
Command
Explanation: More than one simplex operation keyword has been specified
in an LCC command copy group.
Alternate Exception Action: None.
X'02C102' Load Equivalence Internal Value Not Unique
Explanation: The first two bytes of two or more list entries on the Load
Equivalence command are not unique. Setting both external values to the
same value will not prevent the error.
Alternate Exception Action: None.
X'02C602' Invalid Load Equivalence Mapping Type
Explanation: The Mapping Type on the Load Equivalence command is not
X'0100'.
Alternate Exception Action: None.
X'02C801' An unsupported Input Media Source ID was Specified
Explanation: An unsupported Input Media Source ID was specified in an
XOH-SIMS command.
Alternate Exception Action: Select an installed and available media
source.
X'02C802' Invalid Internal/External Value on LE
Explanation: The Internal or External value on a Load Equivalence
command is not a valid or supported value.
Alternate Exception Action: None.
Specification Check-General — X'02'
75