74
VAIO Digital Studio System Reference Manual
I/O and Expansion Slots
Serial ports
Parallel port
Modem ports
USB ports
PCI slots
AGP slot
IDE headers
i.LINK® (IEEE1394)
ports
Floppy Disk Drive and Controller
Drive
Floppy disk controller
Floppy disk drive
Hard Drives and Controller
Drive
EIDE controller
*
IDE hard drive
*
Bus-mastering EIDE driver installed.
**
The Specifications sheet is supplied with your computer's original documentation.
One high-speed NS16C550-compatible port
One high-speed bi-directional Centronics-
compatible port with ECP and EPP modes
Two RJ-11 connectors (for line and phone)
USB 1 and USB2 (on front panel)
USB3 and USB4 (on rear panel)
Two available slots. Not all PCI slots are available
for expansion. (See Specifications sheet for
**
details.)
One available slot. Maximum length for add-in
cards is 9.05 inches
Primary and secondary
(each supports two ATA-100 IDE drives)
One 4-pin port on front panel
One 6-pin port on rear panel
Description
82077-compatible (supports up to 2.88 MB)
3.5-inch, 1.44 MB
Description
Supports up to four EIDE drives (supports PIO Mode 4
EIDE drives and Ultra DMA/100 Mode drives)
See Specifications sheet for details.**