ViewSonic CDE3201LED User Manual page 28

Using the LCD Display Features
Resetting to Factory Default Settings
To reset all setting to the factory default settings:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select OTHERS menu, then press ENTER to enter
the menu.
3. Press ▲ or ▼ to select All Reset, then press ENTER to reset to the
default settings.
Display ID Setting
To set ID number to LCD display for RS232 function:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select OTHERS menu, then press ENTER to enter
the menu.
3. Press ▲ or ▼ to select Display ID.
4. Press ◄ or ► to set the ID number (1~98).
For details information, refer to the RS232 Protocol on page 29~36.
5. Press EXIT to exit the menu.
Customizing PC Display
Connect the PC and your LCD display using the VGA cable. See "Personal Computer" on page 9.
1. Press SOURCE to display the Source Select menu.
2. Press ▲ or ▼ to select PC, then press ENTER to confirm the setting.
3. Press MENU to display the OSD main menu.
4. Press ◄ or ► to select PICTURE menu, then press ENTER to enter the menu.
5. Press ▲ or ▼ to select PC Settings, then press ENTER to enter its
submenu.
6. Press ▲ or ▼ to select Auto Adjust, Horizontal Position, Vertical
Position, Clock, or Phase, and press ◄ or ► to adjust the setting.
7. Press EXIT to exit the menu.
MENU MENU
MENU MENU
MENU MENU
MENU MENU
19
OTHERS OTHERS
Blue Back
No Signal Power Off
No Operation Power Off
Usage Monitor
Audio Only Off
Display ID 1
All Reset
Execute
:Return :Move :Change Setting
OTHERS OTHERS
Blue Back
No Signal Power Off
No Operation Power Off
Usage Monitor
Audio Only Off
Display ID 1
All Reset Execute
:Return :Move :Change Setting
PICTURE PICTURE
Picture Settings
Screen Size Wide
PC Settings
Color Temperature Normal
Backlight High
Advanced Picture Settings
:Return :Move :Go to Next Menu
ENTER ENTER
PC SETTINGS PC SETTINGS
Auto Adjust Execute
Horizontal Position
Vertical Position
Clock
Phase
Reset Execute
:Return :Move :Press to Execute
ENTER ENTER