Connecting A Sata Drive - Lenovo 7522D6U User Manual

Connecting a SATA drive

A SATA optical drive or a SATA hard disk drive can be connected to any available
SATA connector.
To connect a SATA drive:
1. Locate the signal cable that comes with the new drive.
2. Locate an available SATA connector on the system board. See "Locating parts
3. Connect one end of the signal cable to the drive and the other end to the
4. Locate one of the extra five-wire power connectors and connect it to the drive.
Figure 15. Connecting a SATA drive
20
User Guide
on the system board" on page 10.
available SATA connector on the system board.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Completing the parts replacement" on
page 35.