Table of Contents
Advertisement
Caution! The WAPs are pre-configured and cannot be altered
using this screen. If you change the settings without
first checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
To create a new connection profile:
1. In Idle mode, press Menu
Browser Settings
2. Press Options
Create and follow the on-screen
prompts.
To edit an existing profile:
1. In Idle mode, press Menu
Browser Settings
2. Highlight a profile in the list.
3. Press Options
View.
4. Use the Down Navigation key to highlight the field you
want to edit.
5. Use the keypad to edit the parameter you want to edit.
The fields are:
• Set Name: The profile name.
103
Browser
Options
Browser Profiles.
Browser
Options
Browser Profiles.
• Access name: The access point name.
• Auth type: The type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: The User ID required to connect to the network.
• Password: The user password required to connect to the
network.
• Protocol: The connection protocol used by the WAP browser:
WAP or HTTP.
• Home URL: enter the URL address of the page to use as your
homepage.
• Gateway Address (WAP only): The gateway address of the
proxy server.
• Proxy Address (HTTP only): The proxy server address and port.
• Secure Connection (WAP only): Determines if the connection
will follow a secure protocol.
• Linger Time (sec.): A time period (in seconds) after which the
network is disconnected if there has been no new data traffic in
that time.
• Advanced: Configure some of the IP-specific information.
Hide quick links:
Advertisement
Table of Contents
