Video Input; Input Source Selection (Video, S-Video) - Eiki LC-SB22 Owner's Manual

Video Input

Input Source Selection (Video, S-Video)

Direct Operation
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Input Menu icon.
2
Press the Point
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3 Move the pointer to the source that you want to select
and then press the SELECT button.
When
Auto
automatically detects incoming video signal, and
adjusts itself to optimize its performance. The
projector selects connection in the following
order:
1. S-Video
2. Video
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-Video
VIDEO jack, select S-Video.
✔
Note:
When Monitor out is selected in the Terminal function (p44) ,
Computer 2 is not displayed.
34
buttons to move the red
7 8
ed buttons to move the red arrow
selecting Auto, the
Top Control
✳ See Note at the bottom of this page.
Remote Control
Input Menu
VIDEO
projector
INPUT button
INPUT button
POWER WARNING LA
Video
Computer 1
Computer 2
VIDEO button
Input Menu icon
Move the pointer to
Video and press the
SELECT button.
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
✳