Manual Pc Adjustment - Eiki LC-SB22 Owner's Manual

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the PC Adjust Menu icon.
2 Press the Point
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box. Press the Point
value.
Fine sync
Eliminate flicker from the image displayed. Press the Point
buttons to adjust the value. (From 0 to 31)
7 8
Total dots
Adjust the number of total dots in one horizontal period.
Press the Point
7 8
your PC image.
Horizontal
Press the Point
7 8
position.
Vertical
Press the Point
7 8
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try this
adjustment.
28
buttons to move the red
7 8
ed buttons to move the red framed
buttons to adjust the
7 8
buttons to adjust number to match
buttons to adjust the horizontal picture
buttons to adjust the vertical picture
PC Adjust Menu icon
PC Adjust Menu
Move the red framed
pointer to an item and
press the SELECT button.
Status (Stored / Free) of the
selected Mode.
Selected Mode
Press the Point
to adjust the value.
Press the SELECT button
at this item to adjust other
items.
Press the SELECT button at
the Current mode item to
show the information of the
connected computer.
7 8 buttons