Installation; Positioning The Projector; Adjustable Feet - Eiki LC-SB22 Owner's Manual

Eiki international owner's manual multimedia projector lc-sb22
Hide thumbs Also See for LC-SB22:
Table of Contents

Advertisement

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
Note:
• The brightness in the room has a great influence on picture quality.
It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown below are approximate and may vary from the actual sizes.
A : B = 10 : 1
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
Zoom (max)

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with
the adjustable feet.
1
Lift the front of the projector and pull upward the feet
lock latches on both sides of the projector.
2
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt.
3
To retract the adjustable feet, lift the front of the
projector and pull and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected by menu operation. (p22, 41)
23.9' (7.3m)
18.0' (5.5m)
11.8' (3.6m)
4.6' (1.4m)
100
40
83
33"
40"
100"
813 x 610
2032 x 1524
5.6' (1.7m)
14.4' (4.4m)
4.6' (1.4m)
11.8' (3.6m)
43.3' (13.2m)
200
150
166
126
150"
200"
3048 x 2286
4064 x 3048
21.7' (6.6m)
28.9' (8.8m)
18.0' (5.5m)
23.9' (7.3m)
Adjustable Feet
(Inch Diagonal)
300
Max. Zoom
Min. Zoom
250
A
(Center)
B
300"
6096 x 4572
43.3' (13.2m)
36.1' (11.0m)
Feet Lock Latches
13

Advertisement

Table of Contents
loading

Table of Contents

Save PDF