Contents 1 Important Safety Notice 2 Your Wireless Microphone and Bluetooth Speaker ® Introduction What’s in the box Overview of the unit 3 Get started Connect power Switch on the Bluetooth speaker ® Install/replace microphone batteries 4 Play Sing along through the wireless microphone Play from a Bluetooth enabled device...
1 Important i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the Safety third prong are provided for your safety.
o Battery usage CAUTION – To prevent Notice battery leakage which may result in bodily injury, property damage, or damage to the unit: Notice of compliance • Install all batteries correctly, + and - as marked on the unit. Modifications • Remove batteries when the unit is not The user is cautioned that changes or used for a long time.
Page 6
Bluetooth electrical and electronic products and batteries. SIG, Inc. and any use of such marks by Philips is The correct disposal of these products helps under license. prevent potentially negative consequences on the environment and human health.
Philips offers, register your product Overview of the unit at www.philips.com/welcome. If you contact Philips, you will be asked for the Wireless microphone model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
Page 8
Bluetooth speaker ® d ef a Power indicator • Indicate the power status. • Turn the unit on/off. c Bluetooth indicator ® • Indicate the Bluetooth status. ® d -/+ • Adjust volume. • (Press) pair with a Bluetooth enabled ®...
3 Get started • To switch the unit to standby mode, press on the top panel. • To switch the unit on from standby mode, press again. Always follow the instructions in this chapter in sequence. • If the speaker stays idle for more than 15 minutes, it Connect power switches to standby mode automatically.
Page 10
Push back the battery cartridge, then close the battery compartment. Note • If you are not going to use the microphone for a long time, remove the batteries. • New batteries installed in the microphone support up to 30 hours of continuous use. •...
4 Play Slide the OFF/ON switch on the wireless microphone to the ON position, then select a song from the app and tap Sing -> RECORD. » The wireless microphone starts to pair with the Bluetooth speaker ® Sing along through the automatically.
Play from a Bluetooth ® enabled device Note • The effective operation range between the Bluetooth ® speaker and your Bluetooth enabled device is ® approximately 10 meters (30 feet). • To pair with a Bluetooth enabled mobile device, make ®...
Select ‘PHILIPS_AEA7100‘ on your Play and charge your iPad Bluetooth enabled device (if necessary, ® through the dock connector input ‘0000’ as the paring password). directly » After successful pairing and connection, the Bluetooth indicator on the ® Compatible iPad speaker turns solid blue and the speaker beeps twice.
Charge the iPad The docked iPad begins to charge as soon as the unit is connected to AC power. Play from an external device You can also listen to an external audio player through the Bluetooth speaker. ® AUDIO-IN Connect a 3.5mm audio cable to: • the AUDIO-IN socket on the back of the Bluetooth speaker.
5 Product Dimensions (W x H x D) information 300 x 162 x 148mm • Speaker 162 x 333 x 162mm • Microphone Weight Note 1.3kg • Speaker 0.3kg • Microphone • Product information is subject to change without prior notice.
10 requesting service. If the problem remains ® seconds to set up wireless connection unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, manually. make sure that the device is nearby and the Howling or echo from the wireless model number and serial number are available.