Table of Contents
Advertisement
POWER SOURCE
The PLAY! Scholastic Smarty Cat™ operates on
3 "AA" (UM-3/LR6) batteries.
BATTERY INSTALLATION
1. Make sure the unit is OFF.
2. Locate the battery cover on the back of the
unit. Use your finger to open the battery cover.
3. Install 3 "AA" (UM-3/LR6) batteries as illustrated.
DO NOT USE RECHARGEABLE BATTERIES.
4. Replace the battery cover.
NOTE: The use of alkaline batteries is recommended for maximum performance.
BATTERY NOTICE
•
Install batteries correctly by observing the polarity (+,–) signs to avoid leakage.
•
Do not use rechargeable batteries.
•
Do not mix old and new batteries.
•
Do not use batteries of different types.
•
Remove exhausted or new batteries from equipment when you are not going
to use the unit for a long time.
•
Do not dispose of batteries in fire.
•
Do not attempt to recharge ordinary batteries.
•
The supply terminals are not to be short-circuited.
NOTE: If for some reason the program/activity stops working, please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit will be ready to play again.
TURNING THE UNIT ON
Turn on the unit by pressing the ON key. A short tune will welcome you. If the
screen is fuzzy or jagged, follow these steps to try and correct the problem:
1. Check to make sure the batteries are properly inserted.
2. If the problem still exists, insert new batteries.
2
Advertisement
Table of Contents
