Table of Contents
Advertisement
GETTING STARTED
POWER SOURCE
The Smart Stunts RC Cruiser™ operates on 4 AA batteries (AM-3/LR6).
Batteries included for demo purposes only. For best performance, remove
all factory-installed batteries and use new, alkaline batteries.
The Remote controller operates on 2 AA batteries. Batteries not
included.
BATTERY INSTALLATION
Smart Stunts RC Cruiser™
1. Make sure the unit is OFF.
2. Locate the battery cover on the
bottom of the unit. Use a screwdriver
to loosen the screws.
3. Install 4 new "AA" size (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screws to secure.
Remote controller
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit and open it with
a screwdriver.screws.
3. Insert 2 AA batteries as illustrated.batteries
4. Replace the battery cover and tighten the
screw to secure.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Stunts RC Cruiser and is the answer not in the manual?
Questions and answers