Screen Size And Projection Distance - Eiki EIP-1500T Owner's Manual

Setting Up the Projector
Projecting a Reversed Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the audience.
■ Reverse the image by setting "Rear" in the "PRJ Mode" menu. (See page 52.)
Audience
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed between the mirror and audience, set to "Front" in the "PRJ Mode"
menu. (See page 52.)
■ When the mirror is placed on the audience side, set to "Rear" in the "PRJ Mode" menu. (See page 52.)
Set to "Front"
Audience
Info
• When using a mirror, ensure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional EIKI ceiling-mount
bracket for this installation.
■ Before mounting the projector, contact your nearest EIKI Autho-
rized Dealer or Service Center to obtain the recommended ceil-
ing-mount bracket (sold separately).
■ Invert the image by setting "Ceiling + Front" in "PRJ Mode". See
page 52 for use of this function.
18
Mirror
Translucent screen
Translucent screen
Set to "Rear"
Audience
Mirror