Advertisement
Quick Links
Advertisement
Related Manuals for Eiki 392
Summary of Contents for Eiki 392
- Page 1 Overhead Projector...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using your EIKI 392 overhead projector, basic safety precautions should always be followed, including the following: 1. Read the following instructions carefully before operating the EIKI overhead projector. 2. Make sure that the operating voltage of the overhead projector corresponds to your local voltage. - Page 3 TABLE OF CONTENTS Name of Parts Specifications and Technical Data Operation Procedure Maintenance & Repair Page...
- Page 4 NAME OF PARTS Head Mirror Fresnel Lens Lamp Change Knob Safety Interlock (at the edge of the cabinet) Stage Glass Power Switch Focus Knob Post Lock Lever Stage Lock...
- Page 5 SPECIFICATIONS AND TECHNICAL DATA Lamp Voltage Lamp changer Safety switch Working stage Projection angle Focal length Light output Packing dimensions Gross Weight EYB 360 watt 120V/60Hz Provides space and ability to switch between lamps. Single Lamp Provided Automatic Power Shut Off 10”...
-
Page 6: Operation Procedure
OPERATION PROCEDURE 1. Be sure the voltage of AC outlet corresponds to the projector before connecting the AC power cord. 2. Pull up the post to set up the Head Mirror to an up-right position until the post is locked automatically. (See fig.1) fig. -
Page 7: Maintenance And Repair
MAINTENANCE AND REPAIR 1. Replacing the lamp a) Disconnect the power before replacing the lamp. b) Wait until the lamp is cooled down. c) Pull the stage lock to open the projection stage. d) Push the lever to open the condenser lens frame. (See fig.3) e) Remove the defective lamp and replaced it with a new lamp. - Page 8 Eiki dealer, to be free from defective materials and workmanship for a period of 3 years. (Lamp and fuses excluded) Eiki agrees to repair any defect or furnish a new or equal part through an authorized Eiki Service Dealer or Service Center without charge within this period.