Canon EOS 6D Instruction Manual page 64

Easy Connection via WPS (PIN Mode)
[Auto setting]
Configures the settings available in [Manual setting] automatically.
However, this option can only be used in environments using DHCP
servers or access points or routers with DHCP server functionality,
such that IP addresses and related settings are assigned and
configured automatically.
If an error is displayed even though the IP address and related
settings should be automatically assigned and configured, select
[Manual setting].
[Manual setting]
If [Auto setting] results in an error, enter the IP address manually.
Enter the IP address assigned to the camera when prompted for the
IP address.
Enter the [IP address], [Subnet mask], [Gateway], and [DNS
address] on each screen as they are displayed.
If you are not sure about what to enter, see "Checking Network
Settings" (p.166) or ask your network administrator or another
person knowledgeable about the network.
When entering numbers such as IP
address or subnet mask, turn the <6>
dial to move the input position on the
upper area and turn the <5> dial to
select the number. Press <0> to enter
the selected number.
When you have finished entering
information, press the <M> button.
A confirmation screen is not displayed.
64