Canon EOS 6D Instruction Manual page 112

Easy Connection via WPS (PIN Mode)
112
Select [WPS (PIN mode)].
4
Press the <V> key to select [WPS
(PIN mode)], then press <0>.
Select [OK] and press <0> to go to
the next screen.
Specify the PIN code at the
5
access point.
At the access point, specify the 8-digit
PIN code displayed on the camera's
LCD monitor.
For instructions on setting PIN codes
at the access point, refer to the
access point's instruction manual.
After the PIN code is specified, select
[OK] and press <0>.
Connect to the access point.
6
Select [OK] and press <0> to
establish a connection with the
access point.
When a connection with the access
point is established, the [IP address
set.] screen is displayed.
Set the IP Address.
7
Press the <V> key to select how the
IP address should be set, then press
<0>.
Select [OK] and press <0> to go to
the next screen.