Advertisement
Quick Links
PRODUCT MODEL NUMBERS
MSD2242VE
MSD2542VE
MSD2550VE
Electrical: A 115 Volt, 60 Hz., AC only 15 or 20
amp fused, grounded electrical supply is required.
It is recommended that a separate circuit serving
only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use
an extension cord.
Water: A cold water line with water pressure
between 30 and 120 psi (207 - 827 kPa) is
required for the water dispenser and ice maker.
Reverse osmosis water supply: The pressure of
the water supply coming out of a reverse osmosis
system going to the water inlet valve of the
refrigerator needs to be between 30 and 120 psi
(207 - 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 - 414 kPa).
LOCATION REQUIREMENTS
1
/
" (1.25 cm)
2
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Side by Side Refrigerator
OVERALL DIMENSIONS
2" (5.08 cm)
D
top of
cabinet
A
not incl.
handle
Depth
Cab. Width Door Width Cab. Height Overall Height
Model size
"A"
22 cu.ft.
31-3/8"
32-3/4"
25 cu.ft.
31-3/8"
35-1/2"
To ensure proper ventilation for your refrigerator, allow for 1⁄2 " (1.25 cm) space on
each side and at the top. When installing your refrigerator next to a fixed wall, leave
2 " (5.08 cm) minimum on each side (depending on your model) to allow for the
door to swing open. If your refrigerator has a water dispenser and ice maker, allow
extra space at the back for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
1
E
overall
Handle and door style
will vary with model.
C
Dimensions "D" and "E"
include rollers extended 3/4".
B
"B"
"C"
"D"
33-1/8"
65-7/8"
35-7/8"
68-7/8"
"E"
66-3/4"
69-3/4"
Ref. W10153840
06-11-08
Advertisement
