Direct Power On/Off; Picture Freeze Function - Sony VPL-CW125 Brochure & Specs

Direct Power On/Off

When activated in the projector's menu, this feature enables
standby mode to be skipped when power is sent to the
projector, thereby significantly reducing start-up time. The
internal cooling fan driver circuitry works even after power has
been turned off, allowing the projector to be powered on or
off from a circuit breaker switch.
Low Fan Noise
The highly efficient new cooling system keeps the new
C Series projectors cool, even after long periods of usage. This
feature also helps to provide a whisper quiet 28dB operational
noise level in standard lamp mode
Off and Go Function
The efficient new cooling system in the new C Series
projectors has an integrated circuit that continues to run the
fan after power is turned off. This allows users to power off
without having to wait for the projector to cool down.
* If the unit is on for 15 minutes or less, the cooling fan may stop due to
insufficient charging.
** The built-in circuit may cause the cooling fan to continue operating for a
short period of time after the power is turned off and on/standby indicator
changes to red colour.
Auto Input Search
When switched on, the projector will automatically check
all input connections and display images from the detected
input.
*Default setting for Auto Input Search is Off.

Picture Freeze Function

To minimise disruptions during a presentation, this function
freezes a current on-screen image to allow the presenter to
make amendments or prepare the next presentation.
Flexible Orientation
Installation and application possibilities are boundless
with this feature, as the projectors can be tilted 90 degrees
upwards or downwards from the horizontal axis. This allows
these projectors to be used even in rear projection systems.