HP Vectra VL6 8 Installation Manual page 13

Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2.
• IBM AUTO LANStreamer PCI card and drivers disk.
• Driver Name for Vectra VL8 and VL7: W95setup.inf Size: 40KB Date: 9/
• Driver Name for Vectra VE7/VE8: Streamer.vxd Size: 80KB Date: 9/13/96.
• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/
Device Configuration
I/O Base Address
Interrupt Request
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 When Windows 95 restarts a message will appear that new hardware has
6 Insert disk , 4 of 5, IBM Auto LANStreamer driver diskette.
7 Click the "Next" button to begin hardware wizard.
8 Click on "Other Locations" in the "Update Device Driver Location" dialog
9 "IBM Auto LANStreamer PCI Adapter(NDIS3)" should now be listed.
17/96.
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Vectra VL8
F800h
11
Level
adapter card into a PCI slot.
PCI Diagnostic Disk) and power on the machine.
the adapter is "OK."
been found.
box, and set path to "A:\WIN95" then click "OK"
(If you have an HP pre-loaded HDD, set the path statement to
"C:\MASTERS\LANDRV\LNSTRM\DISK4\WIN95\").
3 Connecting to a Windows NT Server 3.51
Vectra VL7 Vectra VE7/VE8
C800h DC00h
11 10(11)
Windows 95 SR2