Asus M3A - Motherboard - ATX User Manual page 130

Creating a RAID 1 configuration
To create a RAID 1 set:
1. In the Main Menu, press <2> to enter the "Define LD" function.
2. Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 AMD Technology, Inc.
LD No
LD 1
Strip Block:
Gigabyte Boundary: ON
Channel:ID
Assignment
1:Mas xxxxxxxxx
2:Mas xxxxxxxxx
3:Mas xxxxxxxxx
4:Mas xxxxxxxxx
[↑]Up
3. Highlight the LD1 item and press <Space> to select RAID 1.
4. Move to the Assignment item by using the down arrow key and set Y to any
two of the drives.
5. Press <Ctrl+Y> to save the setting. The utility prompts the following
messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl+Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press <Ctrl+Y> to key in the desired capacity or press any key to continue.
6. The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 AMD Technology, Inc.
LD No
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
[↑]Up
5-30
[ Define LD Menu ]
RAID Mode Total Drv
RAID 1 2
64 KB
[ Define LD Menu ]
Drive Model
[ Keys Available ]
[↓]Down [ESC]Exit [Space] Change Option
[ Define LD Menu ]
RAID Mode Total Drv
RAID 1 2
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
[ Keys Available ]
[↓]Down [ESC]Exit
Fast Init: OFF
Cache Mode: WriteThru
Capacity (MB)
xxxxxx Y
xxxxxx Y
xxxxxx N
xxxxxx N
[Ctrl-Y]Save
Capacity(MB)
xxxxxx Functional
----
----
----
----
----
----
----
[Enter] Select
Status
----
----
----
----
----
----
----
Chapter 5: Software support