Table of Contents
Advertisement
nVidia RAID Setup
RAID Setup
nVidia RAID Function
nVidia RAID Function [Disabled]
Enables or disables the NVIDIA
Configuration options: [Disabled] [Enabled]
The following items appear when this item is set to [Enabled].
SATA1 [Disabled]
Sets the SATA 1 as RAID.
Configuration options: [Disabled] [Enabled]
SATA 2 [Disabled]
Sets the SATA 2 as RAID.
Configuration options: [Disabled] [Enabled]
SATA 3 [Disabled]
Sets the SATA 3 as RAID.
Configuration options: [Disabled] [Enabled]
SATA 4 [Disabled]
Sets the SATA 4 as RAID.
Configuration options: [Disabled] [Enabled]
SATA 5 [Disabled]
Sets the SATA 5 as RAID.
Configuration options: [Disabled] [Enabled]
SATA 6 [Disabled]
Sets the SATA 6 as RAID.
Configuration options: [Disabled] [Enabled]
Hard Disk Write Protect [Disabled]
Enables or disables the device write protection. This will be effective only if device
is accessed through BIOS.
Configuration options: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host]
Selects the mechanism for detecting 80Pin ATA(PI) Cable.
Configuration options: [Host & Device] [Host] [Device]
-2
[Disabled]
RAID function.
®
Options
Disable
Enable
Chapter : BIOS setup
Advertisement
Table of Contents
