Table of Contents
Advertisement
3.
Use the up or down arrow keys to select a the RAID set you want to rebuild,
then press <F7>. A confirmation message appears.
RAID Mode: Mirrored
Stripe Width: 1
Port
0.0
1.1
4.
Press <ENTER> to start rebuilding
the array, or <ESC> to cancel.
5.
When you press <ENTER>, a confirmation message appears. Press <Y> to
overwrite all data on new (or added) disks, or <N> to cancel. The array List
screen displays the RAID set after rebuilding.
All data on new (or added) disks will be overwritten. Continue?
-
Array 1 : NVIDIA MIRROR
- Select Disk Inside Array -
Stripe Block: 64K
Index
Disk Model
1
XXXXXXXXXXXXXXXXX
0
XXXXXXXXXXXXXXXXX
[↑↓] Select [F6] Back
[Y] YES
XXX.XXG
Capacity
XXX.XXGB
XXX.XXGB
[F7] Finish
Rebuild array?
[ENTER] OK
[ESC] Cancel
[N] NO
Chapter : Software support
Advertisement
Table of Contents
