Table of Contents
Advertisement
6.
USB connectors (10-1 pin USB56, USB 78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
M2N68 SE USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
M2N68 SE Analog front panel connector
• We recommend that you connect a high-definition front panel audio module to this
• By default, this connector is set to [HD Audio]. If you want to connect a High Definition
1-22
M2N68 SE
AAFP
M2N68 SE
connector to avail of the motherboard high-definition audio capability.
front panel audio module to this connector, set the Front Panel Select item in the BIOS
to [HD Audio]. See section "2.4.3 Chipset" for details.
USB56
USB78
PIN 1
PIN 1
PIN 1
PIN 1
HD-audio-compliant
pin definition
compliant definition
USB910
PIN 1
Legacy AC'97
ASUS M2N68 SE
Advertisement
Table of Contents
