Main Menu; System Time; System Date; Legacy Diskette A - Asus M2N68 AM - Motherboard - Micro ATX User Manual

2.3

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
Main Advanced
System Time

System Date

Legacy Diskette A

IDE Configuration

Primary IDE Master
Primary IDE Slave
SATA1
SATA2
SATA3
SATA4
System Information
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
2.3.1 System Time [xx:xx:xx]
Allows you to set the system time.
2.3.2 System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3 Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled] [720K , 3.5 in.]
[1.44M, 3.5 in.] [360K, 5.25 pin] [1.2M 5.25 pin] [2.88M, 3.5 pin]
2.3.4 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE devices
installed in the system. Select an item then press <Enter> if you wish to configure the item.
Onboard IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller. Configuration options: [Enabled]
[Disabled]
Serial-ATA Devices [Enabled]
Allows you to disable or set the Serial-ATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID Mode]
ASUS M2N68-AM
BIOS SETUP UTILITY
Power Boot Tools
[04: 08 : 23]
[Wed 01/09/2002]
[1.44M,3.5in.]
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+-
Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
2-9