Switching The Power On Or Off - HTC Vivid ATT User Manual

15 Getting started
Charging the battery
The battery is partially charged when shipped. Before you turn on and start using HTC
Vivid, it is recommended that you charge the battery. Some batteries perform best
after several full charge/discharge cycles.
§ Only the power adapter and USB sync cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from HTC Vivid while you are charging it using the
power or car adapter.
1. Plug the power adapter into the USB connector.
2. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.
When you charge the battery and HTC Vivid is on, the charging battery icon
displayed in the status bar. After the battery has been fully charged, the charging
battery icon turns to a full battery icon
As a safety precaution, the battery stops charging when it overheats.

Switching the power on or off

Switching the power on
Press the POWER button. Easy.
When you turn on HTC Vivid for the first time, you'll need to set it up.
.
is