Table of Contents
Advertisement
To charge the battery
1.
Connect the USB connector of the AC adapter to the sync connector at the
bottom of your device.
2.
Plug in the AC adapter to an electrical outlet to start charging the battery.
The battery will be fully charged after about 3 hours of charging.
Note
Only the AC adapter and USB sync cable provided with your device must be used
to charge the battery.
Storage card
To install the microSD card
1.
Remove the stylus and then
remove the back cover.
2.
Locate the microSD card slot on
the upper part of the exposed right
panel.
3.
Insert the microSD card into the
slot with its gold contacts facing
down until it clicks into place.
Note
To remove the microSD card, press to
eject it from the slot.
Quick Start Guide 9
Storage
card slot
Advertisement
Table of Contents
