Samsung SCX-4729FW User Manual page 162

Wireless network setup
10 The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Select No if you want to return to the beginning screen.
Then, click Next.
11 Click Next when the Confirm Printer Connection window appears.
12 Select the components to be installed. Click Next.
After selecting the components, you can also change the machine name,
13
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
14 After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 16.
15 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
16 To register as a user of the machine in order to receive information from
Samsung, click On-line Registration.
17 Click Finish.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
• USB cable
Creating the ad hoc network in Windows
Check whether the USB cable is connected to the machine.
1
Turn on your computer and the wireless network machine.
2
Insert the supplied software CD into your CD-ROM drive.
3
Click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter, which represents your
CD-ROM drive and click OK.
2. Using a Network-Connected Machine
162