Items To Prepare - Samsung SCX-4729FW User Manual

Scx-472 series; scx-470 series monochrome multifunction laser printer
Hide thumbs Also See for SCX-4729FW:
Table of Contents

Advertisement

Wireless network setup
From the computer
From the computer, we recommend using a USB cable with the program
provided in the supplied software CD
See "Setup using Windows" on page 159.
See "Setup using Macintosh" on page 165.
With a USB cable: You can simply set up a wireless network using the
program on the supplied software CD. Only Windows and Macintosh
operating systems are supported (see "Setup using Windows" on page 159
or "Setup using Macintosh" on page 165).
You can also install a wireless network in Printer Settings Utility with a USB
cable after installing the driver (Windows and Macintosh operating systems
are supported).
With a network cable: You can set up a wireless network using the
SyncThru™ Web Service program (see "Using a network cable" on page 170).
14
Using the WPS button
If your machine and an access point (or wireless router) support Wi-Fi Protected
Setup™ (WPS), you can easily configure the wireless network settings by
pressing the
(WPS) button on the control panel without a computer.
If you want to use the wireless network using the infrastructure mode, make
sure that the network cable is disconnected from the machine. Using the
WPS (PBC) button or entering the PIN from the computer to connect to the
access point (or wireless router) varies depending on the access point (or
wireless router) you are using. Refer to the user's guide of the access point
(or wireless router) you are using.

Items to prepare

Check if the access point (or wireless router) supports Wi-Fi Protected
Setup™ (WPS).
Check if your machine supports Wi-Fi Protected Setup™ (WPS).
Networked computer (PIN mode only)
Choosing your type
There are two methods available to connect your machine to a wireless network
using the
(WPS) button on the control panel.
The Push Button Configuration (PBC) method allows you to connect your
machine to a wireless network by pressing both the
control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected
Setup™ (WPS)-enabled access point (or wireless router) respectively.
(WPS) button on the
2. Using a Network-Connected Machine
154

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents