60202048GB.fm Page 13 Friday, April 29, 2011 3:24 PM
Remove the blanking plates for the cabinet.
Turn the hinge over and place it on the diagonally opposite
corner of the cabinet. Screw back in place.
Repeat with the other hinge. Replace the cabinet blanking
plates.
Replace the door and re-attach the hinges, put the two
spacers on the new hinge side.
Check that the Larder fridge door is aligned horizontally and
vertically and that the door seals are secure on all sides before
finally tightening the hinge bracket screws.
13
Need help?
Do you have a question about the AFB 647 A and is the answer not in the manual?
Questions and answers